Maxisafe T-Bar roof anchor provides quick and easy
installation for roof access onto sheet metal roofs. Fits to edge of the roof sheeting
and easily secured using existing screws and holes in the sheeting.
- Rated
for Single use only (15kN)
- Only suitable for sheet metal
roofing with a minimum of 0.42m thickness in the following profiles, provided
roof sheets are secured in place with roof screws as per manufacturerâ??s
instructions
- It is important to ensure that the structure in which
the product is being applied to has sufficient strength to sustain the applied
load
- Must be used in conjunction with an Energy Absorbing
device
- Temporary anchor for any worker that needs to access
rooftops such as Roofers, plumbers, servicing technicians, installers, painters
- Always
refer to the User Instruction Manual prior to use
- Certified
to AS/NZS 5532:2013
Product Features- MAXISAFE
FLAT BAR ANCHOR MEETS THE REQUIREMENTS OF AS/NZS55232 2013 & HAS A RATING
OF 1 PERSON - 15Kn
- 500mm Fixed Anchor for Roof Work
- Suitable
for trapezoidal custom orb roof top
- Material Steel
- Not
to be used in acidic or basic environments
- Not to be used
for lifting
- Fixings required
- Read and
comply with user instructions before use
ANCHOR
STANDARDS
In recent time there has been some confusion in the Standards for Anchors. The
above information is derived from AS/NZS1891.4 2009 Selection Use and
Maintenance.
Reading this standard will provide much
information leading to the correct application of Industrial Fall Arrest
Systems. In providing information on applications for Anchorages this section
provides the strength requirements as above. It does not provide methodology of
testing, this information is contained in other Standards
- AS/NZS5532
2013 Manufacturing requirements for single point anchor device used for harness
based work at height
- AS/NZS1891.2 2001 Horizontal lifeline
and rail systems (this standard has provision for Proprietary Systems)
- AS/NZS1891.3
1997 Fall-arrest devices (refer Section 2.3 Anchorage Lines)
MAXISAFE
ANCHORAGES
Whilst currently small the MAXISAFE range of ANCHORS can provide the safety
required to many applications.